3mm 6mm 10mm aluminium plate coils 3003 5083 1100 polished anodized
sheet plates factory
Mill finish, this is the most popular of the formable grades of
aluminum sheet. It conforms to Federal Specification QQ-A-250/2 and
the principal alloying element is manganese, in amounts from 1.0 to
1.5%. It is non-heat treatable and has excellent weldability and
corrosion resistance
We offer 5083 aluminum plates that satisfy the requirements for
many industries. 5083 aluminum plate has higher strength than 5052
aluminum plate, and it is also highly resistant to corrosion. It is
especially suited for cryogenic applications as it can withstand
extremely low temperatures without becoming brittle or losing its
other properties. 5083 plate is easy to form, stamp, weld and
finish.
APPLICATIONS
Due to its strength and temperature characteristics, 5083 aluminum
plate is used in:
- pressure vessels
- truck, marine, underwater vehicles
- cryogenic equipment
SIZES OF 5083 PLATE
1/4" - 1" X 48" - 96" X 288"
3003 aluminum plates react well to mechanical finishing and organic
finishes. our aluminum sheet has a wide range of sizes readily
available to the AMS 4008 for H14
3003 Aluminum Alloy has good machinability and welding is readily
accomplished by means of conventional welding methods. Commonly
used in chemical equipment, ductwork, and in general sheet metal
work. 3003 Aluminum is typically used in stampings and the
manufacturing of pressure vessels, builder's hardware, garage
doors, awning slats, refrigerator panels, gas lines, gasoline
tanks, heat exchangers, drawn and spun parts, and storage tanks.
All of our 3003 Aluminum Sheet is protected on one side with a
protective vinyl film.
Aluminum sheet metal is great for most custom metal fabrication.
The following are the most commonly used aluminum grades that our
customers require.
1104-H14
Commercially pure aluminum, chemical and weather resistant.
Ductile, with good weldability, but it is weak. RuiYi customers use
it in jewelry and chemical applications.
2024-T3
2024 fabrication typically revolves around aerospace applications.
This type of aluminum alloy has great machinability, fair corrosion
resistance, is heat treatable and has good workability and
appearance.
3003-H14
3003-H14 maintains good weldability and formability, and is
corrosion resistant. customers use 3003-H14 in mail boxes,
cabinets, tanks, stampings, spun and drawn parts, and fan blades.
5052-H32
5052-H32 has been great for customer use in electronic chassis,
tanks, and pressure vessels. While stronger than 3003 it is still
formable and has high corrosion resistance and weldability.
6061-T6
6061-T6 is a head treatable structural alloy. customers like the
great weldability, corrosion resistance, and great strength.
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
RuiYi Metal offers premium aluminum products including foil, sheet,
plate and bar in rolls and sheets slit to your specifications. The
thickness or gauge of the material is what determines whether is is
called foil, sheet or plate. Aluminum foil material thickness
ranges from .0005" to .0079". Aluminum sheet material thickness
ranges from .008" to .0125". Aluminum plate and bar material
thickness ranges from .0125" to 5.00".
