Aluminum Diamond Plate 1050 manufacturer tread plate 4 " x 8 " for
floor
1050 aluminum sheet belongs to commercially pure wrought family
with a purity of 99.5% Aluminum. Except Al, 0.4% of Fe is added to
1050 aluminum sheet, thus, it has high electrical conductivity.
1000 series aluminum group offers the best correction resistance
compared to any alloy group, so does the 1050 aluminum sheet
Surface: mill finish, brushed, anodized, polished etc.
Standard: GB, EN, ASTM, DIN
Factory Certificate: ISO9001
Packing: seaworthy wooden pallet or customized
Loading Port: Shanghai, Ningbo, Tianjin, Qingdao
1050 4x8 diamond aluminum plate sheets structure novel, non-slip
effect. Light weight, excellent durability. The quality of about
7kg per square meter, the tensile strength of 200N per square
millimeter, aluminum extension of high relative elongation higher
than 10%, can withstand high bending without breaking, good
toughness.
Specification of 1050 4x8 diamond plate sheets
Temper H*2,H*4,T4,T6
Thickness(mm): 1.2-7.0
Widthness(mm): 100-1650
Length(mm) : 500-16000
Diamond plate, also known as checker plate, tread plate and Durbar
floor plate, is a type of metalstock with a regular pattern of
raised diamonds or lines on one side, with the reverse side being
featureless
Alloy available: 1050 1060 1100 3003, 3105, 5052, 5005, 5754 5083
5182, 6061 6063 6082, 7075, 8011…
Temper: HO, H111,H12, H14, H24,H 32, H112, T4, T6, T5,T651
Surface:Mill/Emboss/Diamond/2bar/3bars/Bright
Thickness: 0.2mm to 300mm
Width: 30mm to 2300mm
Length:1000mm to 10000mm.
Please contact us for more details
| Chemical Analysis of aluminum alloy diamond plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
