Brite finish 1/4 Aluminum Diamond Plate alloy 3003 aluminium 1 bars
one bar sheet
1/4 Aluminum Diamond Plate include one bar, two bars, three bars and five bars. And tempers
include T4, T6, as well as T651. Among them,1/4 Aluminum Diamond
Plate is the most common aluminum diamond plate because of its good
machinability and weldability. And it is moderately high corrosion
resistance and is heat treatable. Thus, it is frequently found in
automotive and marine application.
1/4 Aluminum Diamond Plate description:
1/4 Aluminum Diamond Plate with an embossed diamond plate pattern
in a 48 x 96 sheet. These sheets are perfect for protective and
decorative wall panels, wainscoting applications and trailer usage.
They are rolled and boxed for shipping.
1/4 Aluminum Diamond Plate features:
Alloy:1050 1060 1070 1100 3003 5052
Partterns: Bright diamond ,One,Two,three,Five Bar
Temper:O-H112
Thickness:0.1-10mmm
100% Aluminum
Easy to cut with tin snips
Bends easily around a soft curve
Has PVC protection for shipping and installation puposes
Rolls for shipping
Aluminum diamond plate Brite Finish sheets are pressed aluminum
sheets bearing a raised diamond pattern on one side. They are
weather and corrosion proof and easy to clean, as well as being
skid-resistant. This makes them suitable for a wide variety of
applications, indoors and outdoors. It is also known as tread
plate, checker plate, durbar plate. It is a type of aluminum metal
sheet with a pattern of raised diamonds or lines on the front side.
These sheets are perfect for protective and decorative wall panels,
wainscoting applications and trailer usage.
We can supply
Alloy: 1050 1060 1100 3003, 3105, 5052, 5005, 5754 5083 5182, 6061
6063 6082, 7075, 8011…
Temper: HO, H111,H12, H14, H24,H 32, H112, T4, T6, T5,T651
Surface:Mill/Emboss/Diamond/2bar/3bars/Bright
Thickness: 0.2mm to 300mm
Width: 30mm to 2300mm
Length:1000mm to 10000mm.
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
