3105 H14 H22 H24 diamond aluminium plate manufacturer Polished
aluminum tread plate
Aluminum diamond plate, sometimes called aluminum tread plate,
aluminum floor plate, or aluminum cable.
Diamond aluminium tread plate or floor plate is widely used for a
variety of structural, architectural and cosmetic applications. A
method has been developed to roll metal plates with an upraised
"lug" pattern, providing the customer with several choices to best
meet the needs of the project, with specific qualities of
cleanability, impact resistance, support strength, and corrosion
resistance.
Aluminum alloy 3105 is essentially a 98% aluminum alloy with minor
additions to increase strength over that of alloy 1100 and 3003. It
is not hardenable by heat treatment and it has good corrosion
resistance,
formability and weldability.Aluminum alloy 3105 is most commonly
used where a painted finish is desired.
Aluminum alloy 3105 is most commonly used where a painted finish is
desired. Typical applications include general sheet metal work
requiring greater strength than is provided by 1000 series aluminum
alloys, residential siding, mobile homes and sign making.
3105 Aluminum plate is typically used for floor covering, access
ramps, step ladders, slip resistance surfaces, wall and column
protection to prevent impact damage, commercial vehicles,
refrigerated trucks, cold rooms, vans, busses, trailers, pickup
trucks and general sheet metal works
| Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
