5052 H32 commercial vehicles aluminum diamond sheet plate 3003
aluminium treads plate
Diamond aluminum tread plate structure novel, non-slip effect.
Light weight, excellent durability. The quality of about 7kg per
square meter, the tensile strength of 200N per square millimeter,
aluminum extension of high relative elongation higher than 10%, can
withstand high bending without breaking, good toughness.
Diamond aluminium tread plate common alloy: 1060, 1100, 3003, 3105, 5052, 5083, 5754, 6061, 6063, 6082
Temper: H12, H14, H16, H18, H22, H24, H26, H32, H34, H36, H38, O
The application of diamond aluminium tread plate:
In the transportation, construction, decoration, equipment around
the floor, machinery, shipbuilding and other fields are widely
used.
Aluminum checker plate | aluminium diamond plate is extensively used, including:
1. Flooring and vertical panels in the road transport industry –
commercial vehicles, buses, coaches, fire engines, military &
utility vehicles, etc.
2. Decorative indoor and outdoor panels for architectural /
building & construction
3. Indoor and outdoor walkways, steps, stairways, gantries,
bridges, cranes
4. Railway rolling stock
5. Stations and freight terminals for railways, underground
railways, ports, cargo handling, etc
.
Aluminum checker plate sheet suppliers, Aluminum diamond plate manufacturers China, Aluminum tread plates suppliers,Chequered aluminum sheet, aluminum brite tread sheet,
3003 aluminum tread plate suppliers, tread plate manufacturers,
aluminum stair tread sheet, aluminum perforated aluminum sheet
China, Diamond tread plate | Chemical Analysis of aluminum alloy Plate |
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | Remains |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | - | - | - | - | - | Remains |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | - | - | Remains |
| 1100 | 0.95 | 0.95 | 0.05-0.2 | 0.05 | - | - | 0.1 | - | - | Remains |
| 1200 | 1 | 1 | 0.05 | 0.05 | - | - | - | 0.1 | 0.05 | Remains |
| 3003 | 0.6 | 0.7 | 0.05-0.2 | 1.0-1.5 | - | - | - | 0.1 | - | Remains |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | - | 0.25 | - | Remains |
| 5042 | 0.2 | 0.35 | 0.15 | 0.2--.5 | 3.0-4.0 | 0.1 | - | 0.25 | 0.1 | Remains |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | Remains |
| 5083 | 0.4 | 0.4 | 0.1 | 0.4-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | Remains |
| 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | - | Remains |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | Remains |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45 | 0.1 | - | 0.1 | - | Remains |
| 6082 | 0.7-1.3 | 0.5 | 0.1 | 0.4-1.0 | 0.6-1.2 | 0.25 | - | 0.2 | - | Remains |
| 7050 | 0.12 | 0.15 | 2.0-2.6 | 0.1 | 1.9-2.6 | 0.04 | - | 5.7-6.7 | 0.06 | Remains |
| 7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | - | 5.1-6.1 | 0.2 | Remains |
